Mini 106 razor blade

  • Time:
  • Click:153
  • source:LENA CNC Machining
-- chamfer of the aperture inside treatment is the smallest bore diameter ø6 as Mini 106 series roll out, the size range of pipe bent inside the aperture of whole Mini series expanded ø6 above, relatively before Mini 107 is the smallest can machine bore diameter from ø7 character, present Mini series covered wider range inside aperture chamfer is machined and bore hole. Medium Mini 106 razor blade has Mini 106 normal inventory to be used technically at treatment steel to mix the cast-iron chamfer that break bits, these razor blade can be used at bore diameter 6.

5mm above, wide 0.

7mm-1.

5mm, the biggest cut deep 0.

The chamfer of 8 is machined, the round horn of point of a knife of Mini 106 razor blade that does not have bits chamfer commonly is R0.

2 with R0.

4mm, can machine bore diameter the smallest can amount to 6mm. Like be the same as razor blade of other Mini series, new 106 razor blade also are to pass openly bolt locking to be in have damp brace up quiver and solder on the hard alloy arbor of steel base. The bit base that passes sclerosis (patent product) the fixed position that assured high accuracy and reliable join. The hard alloy arbor of each length is had inside cold, at the same time base also can return HORN to change after wear away or damaging. CNC Milling