Pro/E divides modular flow

PrtComponent → Assemble → chooses Ab123.

Prt2, build Ab123_bass.

→ of Creat of → of Prt file Component is in ComponentCreat dialog box, type column chooses Part, sub-type column chooses Solid, input file name Ab123_bass. The OK of → of Done of spare parts → that Solidsurface of → of Done of → of Copy of → of Surface of → of OK of → of option of CreatFirstFeature of the pitch on in shooting the Creationoptions dialog box that give chooses a picture to go up is whole the spare parts turns for Surface. 3, Ab123_bass.

Prt file turns for entity, build department of datum plane, fiducial coordinate. (Turn the spare parts for Surface again first for Part, it is to can be mirrorred in Molding in the modification that original part place does later. ) close current window, open Ab123_bass from inside memory.

Prt file. Done of → of Solid of UseQuilt → of → of Protrusion of → of Solid of → of Feature → Creat picks the Ab123_bass part in the window, turn its for entity; Build datum plane, inspect workpiece appearance and decide, the platoon when convenient cent model; Building fiducial coordinate is (3Planes) , determine direction of axis of X, Y, Z, the platoon when convenient cent model; Save file to disk exit. 2, build Mold file (Ab123_m20) 1, build datum plane (fiducial coordinate system) direction of OffsetX of → of Plane of → of Datum of → of Feature → MoldAssem, Y, Z all is defeated 0, create fiducial coordinate department automatically. 2, be record in A of dialog box of occurrence Layout of Creat of → of RefpartLayout of → of Ab123_bass file MoldMode, dot to choose pushbutton of RefrenceModel option lower part, choose Ab123_bass from inside Open dialog box.

Prt; Occurrence CreateReferenceModel dialog box, input file name Ab123_ref. B, dot chooses CSO of ReferenceModelOrigin option lower part to choose pushbutton, appear child the window, choose child the coordinate of the spare parts in the window is; C, dot chooses DEFAULT of RefpartLayoutOrigin option lower part to choose pushbutton, the coordinate in choosing current window is. D, Variable option is chosen below Layout option. E, right in Variable window the spare parts undertakes a platoon. 3, build Workpiece: Name of file of input of → of Workpiece of → of MoldModel → Creat (Ab123_wrk) → builds pane (Workpiece) 4, the either in installing shrinkage ShrinkageShrinkage → to choose Workpiece consults → of Done of → of ByScaling of spare parts → chooses coordinate is → input shrinkage of direction of X, Y, Z respectively.

Automatic5 of → of 005) → DoneScaleRegenerate, establish the range that distribute a model (Partingsurface) name of face of model of cent of input of → of PartingSurface → Creat (like Surf_1) → Add establishs the range that distribute a model according to spare parts appearance. (Because the appearance of all sorts of products is endless identical, establish the range that distribute a model so this one pace is to rely on his to make the range that distribute a model to the understanding of mould structure completely, and not be things to the understanding of the mould, need to be accumulated for long, only the knowledge on book is no good, must actual mould job classics reads aloud. Pull so far the model that just thinks the specification wants cent to come out can throw production, him need is right the understanding of the mould, not be to consult the family's teaching material can be divided those who come out, that is a kind of method of the family only. Because trade a kind of product, the method that uses possibly different. ) 6, build mold insert, travel, thimble uses MoldVolum---Create, the input wants the name of built mold insert, be like Insert1. ---Sketch, draw gives you to want to build diagnostic figure, in this process special canal of use Useedge function is used, command of use Add of tail end step adds a circle casually or square appearance is used with making fixed position. 7, if the measure from the back creates from beginning to end model, pouring (MoldComp, molding) , fly a model (MoldOpening) need not make a characterization more. Additional the experience with my individual, thing of flow path and carry water and so on is absent commonly do in Pro/E, draw again when model of the picture in CAD pursues however, go to the lavatory quite so. 8, say to choose the topic about the mould, software in the final analysis can be a kind of tool only, if not be the word that knows a pattern truly, distributing the model that come out also is a problem great. If want to make an eligible pattern,design staff actually, want to know treatment and mould structure above all; Know the knowledge of the respect that note model even, this are very important, if the issue that notes the likelihood on model to appear can consider in the design, need not be in the problem appears to change again when Pi goods later will change. Still have even if should mix considering product structure assemble a problem. If above issue can consider when the mould is designed, the mould that that design comes out is compared almost perfect. I know to want to consider so much question to embarrass a bit at the same time, the person that just suggests to do a model to set follows the person of other department to communicate more, do not shut the door to build a model. The person that suggests not to do a mould to design additionally does not distribute a model in Pro/E this module wastes time. CNC Milling